Series G4000-FDA
2-piece, Full Port, Cast Iron FDA
Approved Flanged Ball Valves
Sizes: 2" – 10" (50 – 250mm)
Series G4000-FDA 2-Piece, Full Port, Cast Iron, FDA Approved,
Flanged Ball Valves have a double coated electrostatically
applied heat fused epoxy coating on all interior and exterior sur-
faces. The valves are FDA approved, suitable for potable water
and food contact applications. G4000-FDA valves are ideal for
any application requiring a non-corrosive body finish or where a
clean cosmetic appearance is desired. The G4000-FDA features
Lead Free* construction to comply with Lead Free* installation
requirements.
Features
• Fused epoxy coating on all valve surfaces
• Same end-to-end dimensions as conventional
flanged iron gate valves
• Quarter-turn open or closed operation
• Stainless steel ball and stem
• Positive shutoff
• 2-piece body construction
• 8" and 10" sizes come standard with manual gear operator
Specifications
A 2-piece, full port, cast iron FDA approved flanged ball valve
to be installed as indicated on the plans. Lead Free* 2-piece,
Full Port, Cast Iron FDA Approved Flanged Ball Valves shall be
constructed using Lead Free* materials. Lead Free valves shall
comply with state codes and standards, where applicable, requir-
ing reduced lead content. Approved valves shall comply with the
American standard for face-to-face dimensions (ANSI B16.10) for
Class 125 cast iron flanged gate valves. The dimensions and drilling
of the end flanges conform to the American cast iron flange stan-
dard, Class 125 (ANSI B16.1).
The valve shall be FDA approved for potable water or food contact
applications, using stainless steel ball and stem with epoxy coated
valve surfaces. The valve shall be a Watts Series G4000-FDA.
Pressure — Temperature
Maximum Temperature: 140°F (60°C)
Maximum Working Pressure: 200psi (14 bars) CWP non-shock
9
6
5
10
12
4
7
8
2
3
1
11
For Commercial, Industrial and Process Applications
ES-G4000-FDA
Job Name
––––––––––––––––––––––––––––––––––––––––––––
Contractor
––––––––––––––––––––––––––––––––––––––––––––
Job Location
–––––––––––––––––––––––––––––––––––––––––
Approval
––––––––––––––––––––––––––––––––––––––––––––––
Engineer
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
–––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Representative
––––––––––––––––––––––––––––––––––––––––
8" – 10"
G4000-FDA
2" – 6"
G4000-FDA
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
*The wetted surface of this product contacted by consumable water
contains less than 0.25% of lead by weight.
LEAD FREE
*
Materials
1. Body
=
Cast Iron - ASTM A126 Class B
2. Ball 304 Stainless Steel - ASTM A351
3. Seat PTFE
4. Stem 304 Stainless Steel - AISI 304
5. Packing PTFE
6. Gland
=
Cast Iron - ASTM A126 Class B
7. Gasket PTFE
8. Bolt and Nut Steel - ASTM A6
9. Stop Plate Steel Plated - ASTM A6
10. Stop Washer Stainless Steel - AISI 304
11. Handle Ductile Iron - ASTM A439
12. Hex Socket and Head Bolt Steel ASTM A6
=
Valve Surfaces - FDA approved epoxy coating
(2 pages)
(2 pages)
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels