Watts 007M1DCDA Manuel d'utilisateur télécharger pdf

Series 007DCDA

Double Check

Detector Assembly

Sizes: 2" - 3"

• Installation • Service

• Repair Kits • Maintenance

For field testing procedure, send for IS-TK-DL,

IS-TK-9A, IS-TK-99E AND IS-TK-99D.

For other repair kits and service parts, send for

PL-RP-BPD.

RP/IS-007DCDA

Limited Warranty: Watts Regulator Company warrants each product to be free from

defects in material and workmanship under normal usage for a period of one year from

the date of original shipment. In the event of such defects within the warranty period, the

Company will, at its option, replace or recondition the product without charge. This shall

constitute the sole and exclusive remedy for breach of warranty, and the Company shall

not be responsible for any incidental, special or consequential damages, including with-

out limitation, lost profits or the cost of repairing or replacing other property which is

damaged if this product does not work properly, other costs resulting from labor charges,

delays, vandalism, negligence, fouling caused by foreign material, damage from adverse

water conditions, chemical, or any other circumstances over which the Company has no

control. This warranty shall be invalidated by any abuse, misuse, misapplication or

improper installation of the product. THIS WARRANTY IS IN LIEU OF ALL OTHER WAR-

RANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MER-

CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Any implied warranties that

are imposed by law are limited in duration to one year.

Some States do not allow limitations on how long an implied warranty lasts, and some

States do not allow the exclusion or limitation of incidental or consequential damages.

Therefore the above limitations may not apply to you. This Limited Warranty gives you

specific legal rights, and you may have other rights that vary from State to State. You

should consult applicable state laws to determine your rights.

NOTE: For Australia and New Zealand: Pipeline strainers

should be installed between the upstream shutoff valve and the

inlet of the backflow preventer.

Its important that this assembly be tested periodically in com-

pliance with local codes, but at least once per year or more as

service conditions warrant. If installed on a fire sprinkler sys-

tem, all mechanical checks, such as alarm checks and back-

flow preventers, should be flow tested and inspected internally

in accordance with NFPA 13 and NFPA 25.

007DCDA Size: 2

⁄2"

IMPORTANT: Inquire with governing authorities

for local installation requirements.

1 2 3 4

Résumé du contenu

Page 1 - Series 007DCDA

Series 007DCDADouble CheckDetector AssemblySizes: 2" - 3"• Installation • Service• Repair Kits • MaintenanceFor field testing procedure, se

Page 2 - Installation Instructions

Installation Instructions2" - 3" 007DCDAIndoors – Figure 1Watts Series 007DCDA may be installed in either a vertical orhorizontal position.

Page 3 - Second Check Valves

Servicing First andSecond Check Valves2" – 3" 007DCDAReplacement Parts2", 21⁄2", 3" 007DCDAWhen ordering, specify Ordering Co

Page 4 - Test Procedure

Printed in U.S.A.RP/IS-007DCDA 0325 EDP# 1911335 © Watts Regulator Co., 1998Watts USA website: www.wattsreg.comWatts Canada website: www.wattscda.comT

Plus de documents pour Accessoires pour l'eau Watts 007M1DCDA

Voir le document Watts 007M1DCDA Manuel d'utilisateur

Watts 007M1DCDA Manuel d'utilisateur (2 pages)

Commentaires sur ces manuels

Pas de commentaire

Watts 007M1DCDA Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour l'eau Watts 007M1DCDA. Watts 007M1DCDA User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Accessoires pour l'eau Watts 007M1DCDA

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour l'eau Watts 007M1DCDA