Watts FMRO5-M-PT Manuel d'utilisateur télécharger pdf

Feed water parameters

Maximum TDS 2,000 ppm

Iron, maximum 0.3 ppm

Hardness (less than) 15 gpg

Hydrogen Sulfide Zero

Manganese (less than) 0.05 ppm

Turbidity (less than) 1 NTU

Pressure, minimum without pump 30 psi

Pressure, maximum 100 psi

pH 3 - 11

Note: Pretreatment suggested if conditions exceed parameters.

Models

FMRO5-M-PT 50 GPD membrane with plastic tank

FMRO5-M-MT 50 GPD membrane with metal tan

Warranty

Systems are assembled in Phoenix, Arizona, and

come with a one year limited warranty. (Please

see warranty card for more details.)

Specifications

Production, FMRO5-M-PT 50 GPD

Production, FMRO5-M-MT 50 GPD

Storage tank capacity 2.6 gals.

Faucet Lead-free*

Membrane Thin Film

NSF Certification Std. 58

* Meets State of California’s lead-free requirements.

Maintenance

Recommended membrane and cartridge

replacement:

Membrane:

Change based on periodic TDS rejection tests,

or change is typically necessary every 2-3 years.

Pre and post filters:

Change every six months under heavy usage or

every year with light usage.

Flowmatic

NSF certified manifold RO systems reduce these drinking water contaminants

■

Chlorine

■

Copper

■

Radium 226 / 228

■

Tastes & odors*

■

Cadmium

■

Lead

■

Chromium (Trivalent)

■

Perchlorate

■

Giardia Cysts

■

Arsenic

■

Barium

■

Turbidity

■

Entamoeba

■

Cryptosporidium

■

Fluoride

■

Toxoplasma

■

Selenium

■

Chromium (Hexavalent)

■

TDS

■

Nitrate / Nitrite

*Tested and verified by independent laboratory testing.

Authorized dealer

Available from authorized dealers

Flowmatic

reverse osmosis drinking water systems are available from authorized dealers. For sales, installation

and service please contact the dealer listed below:

How to get great tasting & more healthful drinking water for your entire family.

1 2

Résumé du contenu

Page 1 - Flowmatic

Feed water parametersMaximum TDS 2,000 ppmIron, maximum 0.3 ppmHardness (less than) 15 gpgHydrogen Sulfide ZeroManganese (less than) 0.05 ppmTurbidity

Page 2 - One solution!

ContaminantsWater for drinking, beverages and preparing foods should be safe and free from harmful contaminants.This is partic-ularly important if you