Watts PWRO4ZRO Manuel d'utilisateur Page 12

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 11
12
Arsenic Facts
Arsenic (As) is a naturally occurring contaminant found in many
ground waters. Arsenic in water has no color, taste or odor. It must
be measured by an arsenic test kit or lab test.
Public water utilities must have their water tested for arsenic. You
can obtain the results from your water utility contained with in your
consumer confidence report. If you have your own well, you will need
to have the water evaluated. The local health department or the state
environmental health agency can provide a list of test kits or certified
labs.
There are two forms of arsenic: pentavalent arsenic (also called As
(V), As (+5)) and trivalent arsenic (also called As (III), As (+3)). In well
water, arsenic may be pentavalent, trivalent, or a combination of
both. Although both forms of arsenic are potentially hazardous to
your health, trivalent arsenic is considered more harmful than pen-
tavalent arsenic.
RO systems are very effective at removing pentavalent arsenic. A free
chlorine residual will rapidly convert trivalent arsenic to pentavalent
arsenic. Other water treatment chemicals such as ozone and potas-
sium permanganate will also change trivalent arsenic to pentavalent
arsenic. A combined chlorine residual (also called chloramine) where
it does convert trivalent arsenic to pentavalent arsenic, may not con-
vert all the trivalent arsenic in to pentavalent arsenic. If you get your
water from a public water utility, contact the utility to find out if free
chlorine or combined chlorine is used in the water system.
This Watts reverse osmosis system is designed to remove up to 98%
of pentavalent arsenic. It will not convert trivalent arsenic to pen-
tavalent arsenic. Under laboratory standard testing conditions, this
system reduced 0.30 mg/L (ppm) pentavalent arsenic to under 0.010
mg/L (ppm) (the USEPA standard for drinking water). Actual perfor-
mance of the system may vary depending on specific water quality
conditions at the consumer’s installation. In addition to the indepen-
dent laboratory standard testing conditions Watts has conducted
additional field testing on our reverse osmosis units to determine
trivalent arsenic reduction capabilities. Based upon Watts field test-
ing, it has been determined that the RO units are capable of reducing
up to 67% of trivalent arsenic from the drinking water.
The RO membrane component of this Watts reverse osmosis system
must be maintained according to its recommended maintenance
cycle. Specific component identification and ordering information can
be found in the installation/operation manual maintenance section,
by phone at 1-800-224-1299 or online www.watts.com
Vue de la page 11
1 2 ... 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire